a. Removal/installation b. Disassembly/reassembly c. Inspection – Float level height Place the carburetor in the position as shown and measure the distance between the float…
Category: Komatsu PC-01
a. Disassembly/reassembly b. Inspection – Engine switch (Without oil alert) Turn the switch, and check the continuity between the wire and the fan cover with…
a. Disassembly/reassembly
a. Disassembly/reassembly b. Recoil starter assembly 1) Insert the hook on the outer side of the spring into the groove inside the reel. 2) Pass…
a. Disassembly/reassembly
a. Disassembly/reassembly Dual element type:
1) Drain the fuel into a suitable container, and remove the fuel tank (P. 7-2). 2) Disconnect the fuel line, and unscrew the fuel filter…
1) Remove the four 5 x 8 mm tapping screws from the upper muffler protector. 2) Remove the upper muffler protector. 3) Remove the 4…
1) Turn off the fuel valve and remove the strainer cup. 2) Clean the strainer cup with solvent. 3) Install the O-ring and strainer cup.…
1) Remove the fuel tank (P. 7-2) 2) Loosen the nut on the governor arm and move the governor arm to fully open the throttle.…