a. Disassembly/reassembly Dual element type:  

1) Drain the fuel into a suitable container, and remove the fuel tank (P. 7-2). 2) Disconnect the fuel line, and unscrew the fuel filter…

1) Remove the four 5 x 8 mm tapping screws from the upper muffler protector. 2) Remove the upper muffler protector. 3) Remove the 4…

1) Turn off the fuel valve and remove the strainer cup. 2) Clean the strainer cup with solvent. 3) Install the O-ring and strainer cup.…

1) Remove the fuel tank (P. 7-2) 2) Loosen the nut on the governor arm and move the governor arm to fully open the throttle.…

1) Start the engine and allow it to warm up to normal operating temperature. 2) With the engine idling, turn the pilot screw in or…

1) Visually inspect the spark plug. Discard the plug if the insulator is cracked or chipped. 2) Remove carbon or other deposits with a stiff…

1) Remove the four cylinder head cover bolt, cylinder head cover and gasket. 2) Set the piston at top dead center of the compression stroke…

Dual element, cyclone type: 1) Remove the nut, air cleaner cover and wing nut. Remove the air cleaner elements and separate them. Carefully check both…

1) With the engine running, disconnect the yellow lead from the engine switch, and ground the lead against the engine. The oil alert lamp should…